Shop
Showing 517–528 of 645 results
-
Poinsetta Flowers Birdhouse
$29.50 Read moreGreat Holiday theme, Poinsettas hand painted gourd Birdhouse. Sealed for outdoor use.
-
Pole PoleGuard for Square
Read more -
Porch Deck for Adjustable Crescent Tube Entrances
$1.95 Read morePorch Decks are a good place for the parents to feed their young, and helps them get through the entrance. Fits adjustable and standard crescent entrance cylinders. Attach into bracket on entrance with Lexel adhesive. See picture below.
-
Primitive Duo
$10.00 Read moreFor anyone looking for nice gourds to add to your primitive decor, you will love these two gourds. A large, 7" diameter body goose and a 7" diameter short handle dipper gourd.
-
Primitive gourd pitcher
$45.75 Read moreLovely gourd pitcher, decorated with a wood burned tree. Size: 9" tall x 10" wide(to end of handle)
-
Primitive Round Birdhouse
$16.95 Read moreOur new line of Primitive Birdhouses are a real hit with anyone who likes the true "natural" look. The primitive birdhouse is designed after the shape of the gourd, very simple in design, no finishes of any kind. The true color of the gourd is what makes this so beautiful.
Drainage holes in bottom, cleaned out on inside, and ready to hang with a leather strap. No two are alike due to the nature of the gourd. -
Professional Rotary Tool Set
$159.50 Read moreMiniature precision machine with aluminum die-cast head. Quiet, precise and efficient! Grinder with 34 industrial quality bits & cutters with shanks ? 3/32'' (2.3 mm). High concentricity (maximum run out .001''). This high-revving motor has full-wave electronic speed control capable of producing continuously variable speeds between 5,000 and 20,000 rpm and is usable for extended periods at a time. The ground steel spindle runs in a ball bearing assembly, minimizing play. Six high concentricity collets sized 1/32'', 1/16'', 5/64'', 3/32'', 7/64'' and 1/8'' (1.0, 1.5, 2.0, 2.4, 3.0 and 3.2 mm) along with a collet nut are included. MICROMOT steel collets are hardened and thus have a high, consistent flexibility. They also maintain prolonged accuracy, even after regular use. The triple-slit collet is substantially more difficult to manufacture than the four-slit type, but offers a better load-bearing surface. This is especially important for cutters with small shank diameters. These collets should not be compared with unhardened, four-slit collets of brass and aluminum.
-
Proxxon Heavy Duty Transformer NG/5E
$73.95 Read moreThis workstation with electronic speed control comes in a compact heat resistant Noryl casing, Capacity of 5.0A at 16V no load and 12 Volt under load = 60 VA (DC). Primary supply at 110 – 120 V. The thyristor electronic control allows for optimum tool speed and high torque at low speeds. Three sockets for Micromot tools and one pair of sockets for standard 5/32" diameter banana plugs. PTC element prevents overload. Modern design with holes for storing bits and cutters. Foldable tool rest.
Tools and accessories not included. Shown for reference only.
-
Proxxon Micromot Rotary Tool 50 – 12V
$52.95 Read moreThe diameter of only 1.4″ makes this tool very easy to handle. It weighs only 8.1 ounces (230g). A special motor gives it a quiet and effortless drive. The ground spindle and collar bearing all contribute to the ergonomic design. Improved gripping area for comfortable feel and control.
The high quality, triple-slit steel collets ensure accurate clamping of the cutters and high concentricity.
Six MICROMOT collets 1/32″, 1/16″, 5/64″, 3/32″, 7/64″ and 1/8″ (1.0, 1.5, 2.0 2.4, 3.0 and 3.2mm) are supplied. Power usage is 40W max., length 8.6″ and weight 8.1 oz (230g).
This tool requires the use of either the NG/2S or the NG 5/E Proxxon transformer
-
Proxxon Micromot Rotary Tool 50/E 12 Volt (variable speed)
$58.95 Read moreThe diameter of only 1.4″ makes this tool very easy to handle. It weighs only 10 ounces (230g). A special motor gives it a quiet and effortless drive. The ground spindle and collar bearing all contribute to the ergonomic design. Improved gripping area for comfortable feel and control.
The high quality, triple-slit steel collets ensure accurate clamping of the cutters and high concentricity.
Six MICROMOT collets 1/32″, 1/16″, 5/64″, 3/32″, 7/64″ and 1/8″ (1.0, 1.5, 2.0 2.4, 3.0 and 3.2mm) are supplied. Power usage is 40W max., length 8.6″ and weight 10 ounces (283g).
This tool requires the use of either the NG/2S or the NG5/E Proxxon transformer.
-
Proxxon Mini Jigsaw Kit
$154.95 Read moreKit includes:
Jigsaw STS 12/E (28534)
Transformer NG 2/S (38706)
Foot On/Off Control Switch (38700)
Ball Shoe Attachment
8 Blades – 5 coarse, 3 fine
New Heavy-duty carry and storage case
Owner’s Manual -
Proxxon Mini-Jigsaw STS 12/E
$84.25 Read moreIdeal for gourd carving. Also for curved cuts in wood, corrugated boards, plastics and non-ferrous metals. This very light and powerful 12 volt machine is suitable for curved cuts in gourds and wood up to 3/8″ thick and non-ferrous metals up to 3/32″ thick. It’s low weight makes it easy to handle and thus allows for precise control of the cutting action. The specially balanced powerful permanent magnetic motor with electronic speed control ensures variable speeds between 2,000 – 5,000 strokes per minute. Blades sold seperately. Stroke: 15/64″ (6 mm)
Also available in kit form.
This tool requires the use of either the NG/2S or NG/5E transformer.